輕工塑機（蘇州）有限公司
廠址：江蘇省蘇州市吳中區東吳工業園興吳路67號
電話：0512-68226118 68204423
傳真：0512-65134034
郵箱：uuzb@163.com
單頁簡介
產品詳細
產品名稱： ZBJ系列縱包機
發布日期： 2015/9/30 14:28:13
點擊數： 863
二維碼：
簡述：
產品詳情
產品介紹
◆ Product Introduction
該系列縱包機是在引進國外樣機的基礎上吸收消化而設計制造的，共分兩個規格：ZBJ-2000和ZBJ-3200，可對通信電纜從5對~2400對進行復合鋁箔縱包，從而始終保持被縱包后電纜的光滑圓整，以保證質量。
This series longitudinal covering machine is designed and manufactured based on the absorption and diegestion of the introduced foreign model machines, dividing into two specifications: ZBJ-2000 and ZBK-3200. Composite aluminium foil longitudinal lapping from 5 couples to 2400 couples can be carried on to communication cables, therefore to always keep the smoothness and soundness of cables after longitudinal lapping to ensure the quality.
◆特點
◆ Characteristics
◆具有目前國內縱包工作范圍最大之特點。
◆ Having the characterisitcs of the currently largest doemstic longitudinal work scope.
◆經縱包后的電纜圓整、光滑、無縐紋，從而保證了電纜的產品質量。
◆ The cable after longitudinal lapping is round and smooth without rumple to ensure the quality of cable products.
◆操作簡單，整機工作臺面可以在200mm范圍內上下升降，導輪、縱包模、壓緊模調換方便，零配件易購易換。
◆ Simple operation. The work platform surface of complete machine can rise and lower up and down within the scope of 200mm. It is convenient to regulate and replace guide wheel, longitudinal mold and press molding. It is also easy to purchase and replace parts and components.
◆新穎的縱包模設計，可使復合鋁帶平滑，圓整地包在電纜外層。
◆ Novel longitudinal mold design can make composite aluminium strip is smoothly and roundly covered the outer layer of cable.
◆成型模的前后調整更保證了縱包后的光滑、圓整、無縐紋。
◆ The adjustment before and after shaping mold better ensure the smoothness, roundness and non- rumple after longitudinal lapping.
◆縱包模夾可調整角度、距離，使縱包模口與壓緊模穩定在同一中心。
◆ The angle and distance of longitudinal mold clamp can be adjusted to make longitudinal mold gating and press mold stablize in the same center.
◆加熱功率和風量無級調節。
◆ Stepless regulation of heating power and air quantity.
◆主要技術參數
◆ Main Technical Parameters
上一個：沒有資料
下一個： YZB-1000軋紋縱包機